Biomechanical effects of clear aligner with different shape design at extraction space area during anterior teeth retraction.

OBJECTIVE: This study aimed to investigate the biomechanical effects of clear aligner (CA) with different shape designs at extraction space (CAES) area during space closing. MATERIALS AND METHODS: A finite-element method (FEM) model of mandibular dentition, periodontal ligaments, attachments, and corresponding CA was established. The connecting rod design of CAES was modelled for the control group. Eight test groups with different heights of CAES from -4 mm to +4 mm were designed. Tooth displacement tendencies were calculated. The maximum principal stress in PDLs, teeth, and CAs was analysed. Both global coordinate system and local coordinate system were also used to evaluate individual tooth movements. RESULTS: Across all groups, stresses concentrated on the lingual outer surface of CAESs. For the lowered CAES groups, both the stress value and the stress distribution area at CAESs were increased. The lowered CAES groups showed reduced movement in anterior teeth and less tipping tendency of the canines. CONCLUSION: The shape of CAES has a biomechanical impact on anterior teeth movement and should be considered in aligner design. The results suggest that increasing the height of CAES can enhance anterior teeth retraction, while lowered CAES may facilitate controlled root movement. Changes in the shape of CAES represent a potential direction for biomechanical improvement of clear aligner in extraction cases and are worth exploring.

[Soft and hard tissue changes of hyperdivergent class â ¡ patients before and after orthodontic extraction treatment].

OBJECTIVE: To investigate the hard and soft tissue changing trend and contributing factors of skeletal class Ⅱ hyperdivergent patients before and after orthodontic camouflage treatment by analyzing the cephalogram and the three dimensional (3D) facial scan data. METHODS: Eighteen skeletal class Ⅱ hyperdivergent adult female patients who finished camouflage orthodontic treatment were selected. Skeletal and dental measurements were carried out with the cephalometric analysis before and after the treatment. 3D facial data before and after orthodontic treatment were acquired and the anatomical landmarks were set after the repositioning and superimposition process. Hard tissue measurement included 17 mea-surement indicators (sella-nasion-subspinale angle, sella-nasion-supramental angle, subspinale-nasion-supramental angle, facial angle, angle of convexity, Frankfort horizontal plane-mandibular plane angle (FH-MP), Y axis angle, sella-nasion plane-mandibular plane angle (MP-SN), pogonion-nasion-supramental distance, upper incisor-nasion-subspinale distance, upper incisor to sella-nasion, lower incisor-nasion-supramental distance, lower incisor-nasion-supramental angle, upper incisor to lower incisor, upper incisor to sella-nasion, lower incisor-mandibular plane angle, and Z angle), and the changes before and after treatment were measured for 11 of them. Twenty soft tissue landmarks (left/right cheekbone, left/right chelion, left/right crista philtra, soft tissue gnathion, left/right gonion, glabella, labrale infe-rius, labrale superius, soft tissue menton, left/right mid-mandibular border, soft tissue pogonion, stomion superius, sublabial, subnasale, and supralabial) and 9 soft tissue indicators (lower lip height, facial convexity, lower vermilion height, mandibular contour, nasolabial angle, philtral length, philtral width, upper lip height, and upper vermilion height) were measured and recorded for treatment changes. Linear-regression analysis and correlation analysis were carried out for analyzing the relationship between hard and soft tissue changes before and after the treatment. RESULTS: Significant differences were noticed for 18 out of the 20 cephalometric measurements and facial measurements before and after the treatment (P < 0.05), which mainly represented the sagittal retraction of lip area after the treatment. Significant vertical displacements were revealed for soft tissue menton after treatment [(1.88±2.61) mm, P < 0.05]. Significant sagittal displacements were revealed for left/right cheilion [(-2.95±1.9) mm, (-2.90±1.92) mm], labrale inferius[(-4.94±1.95) mm], labrale superius[(-3.25±1.44) mm], sublabial [(-3.10±3.5) mm], and subnasale [(-1.23±1.06) mm] after treatment (P < 0.05). An average of 4.10°±2.57° increasement was noticed for Z angle after treatment. High correlation (r>0.7) was noticed for the displacement of menton after treatment with FH-MP, with the rate of -0.183 :1, and MP-SN, with the rate of -0.157 :1. Moderate correlations (0.7≥r>0.4) were noticed for the other measurements with correlations (P < 0.05). CONCLUSION: A certain extent of facial improvements could be achieved with orthodontic camouflage treatment for skeletal class Ⅱ hyperdivergent patients, which were mostly represented by the improvement of sagittal relationship of nose, lips, and chin. Certain correlations were noticed for the hard and soft tissue changes.

Analysis of oral microbiome on temporary anchorage devices under different periodontal conditions.

BACKGROUND: Temporary anchorage devices (TADs) are maximum anchorages that have been widely used in orthodontic treatment. The aim of the study was to uncover whether a history of periodontitis would influence microbiome colonization on the TAD surface. RESULTS: Patients were grouped by periodontal evaluations before the orthodontic treatment. Patients with healthy periodontal conditions were classified as the healthy group, and patients diagnosed with periodontitis stage II or even worse were classified as the periodontitis group. Scanning electron microscopy (SEM) was used to analyze the existence of biofilm on the surface of 4 TADs from the healthy group and 4 TADs from the periodontitis group. Fifteen TADs from the healthy group and 12 TADs from the periodontitis group were collected. The microorganisms on the surface of TADs were harvested and analyzed by 16S rRNA gene sequencing. α-diversity indices and ß-diversity indices were calculated. Wilcoxon's test was used to determine differences between genera, species as well as KEGG functions. SEM analysis revealed bacteria colonization on the surface of TADs from both groups. Principal coordinate analysis (PCoA) based on ß diversity revealed differential sample clusters depending on periodontal conditions (P < 0.01). When comparing specific genera, Fusobacterium, Porphyromonas, Saccharibacteria_(TM7)_[G-1], Dialister, Parvimonas, Fretibacterium, Treponema were more enriched in TADs in the periodontitis group. In the KEGG analysis, TADs in the periodontitis group demonstrated enriched microbial activities involved with translation, genetic information processing, metabolism, and cell motility. CONCLUSIONS: This analysis elucidated the difference in total composition and function of TADs oral microorganisms between patients periodontally healthy and with periodontitis.

BIBF1120 Protects against Diabetic Retinopathy through Neovascularization-Related Molecules and the MAPK Signaling Pathway.

Diabetic retinopathy (DR) is one of the microvascular complications of diabetes mellitus and a major pathological feature of neovascular DR. These patients potentially experience vision impairment and blindness. Platelet-derived growth factor receptor ß (PDGFRß), fibroblast growth factor receptor 1 (FGFR1), and vascular endothelial growth factor receptor 2 (VEGFR2) are implicated in the DR pathogenesis. Nintedanib (BIBF1120) is an oral selective dual receptor tyrosine kinase (RTK) inhibitor of VEGFR2, FGFR1, and PDGFRß. In this study, intravitreal injection of BIBF1120 blocked the phosphorylation of VEGFR2, FGFR1, PDGFRß, and MAPK signaling pathway proteins in a streptozotocin (STZ)-induced diabetic retinopathy mouse model. In in vitro cell experiments, BIBF1120 did not change cellular activity under normal conditions, while it further suppressed the tube formation, migration, and proliferation of high glucose-induced human retinal microvascular endothelial cells (HRMECs). Additionally, BIBF1120 blocked the phosphorylation of p38, JNK, and ERK1/2 in high glucose-treating HRMECs. Our results indicate that the BIBF1120 treatment can be a novel potential drug to protect against DR.

The effect of maxillary molar distalization with clear aligner: a 4D finite-element study with staging simulation.

INTRODUCTION: Long-term simulation of tooth movement is crucial for clear aligner (CA) treatment. This study aimed to investigate the effect of maxillary molar distalization with CA via an automatic staging simulation. METHOD: A finite-element method (FEM) model of maxillary dentition, periodontal ligaments, attachments, and corresponding CA was established, and a prescribed 2-mm distalization with 0.1 mm each step of the second molar was simulated. The long-term tooth movement under orthodontic force was simulated with an iterative computation method. The morphologic changes of CA during staging were simulated with the thermal expansion method. RESULTS: Twenty steps of molar distalization were simulated. Significant distal tilting of the second molar was revealed, along with the proclination of anterior teeth, which caused the 'reversed bow effect'. For the second molar, 4.63°distal tilting at the 20th step was revealed. The intrusion of the incisors and the second molar were 0.43 mm, 0.39 mm, and 0.45 mm, respectively, at step 20. All the anterior teeth showed a proclination of approximately 1.41°-2.01° at the 20th step. The expression rate of the designed distalization of the second molar was relatively low (approximately 68%) compared to the high efficacy of interdental space opening between molars with CA (approximately 89%). CONCLUSION: A novel method of simulating long-term molar distalization with CA with FEM was developed. The FEM results suggested distal tilting of the second molar and the proclination of anterior teeth during the molar distalization.

Expansion rebound deformation of clear aligners and its biomechanical influence: a three-dimensional morphologic analysis and finite element analysis study.

OBJECTIVES: To determine the expansion rebound deformation (ERD) of clear aligners (CAs) and its biomechanical influence. MATERIALS AND METHODS: A four-premolar extraction treatment plan was carried out for a patient with 2 CA companies. Thirty-six digitally scanned clear aligners with the corresponding 36 virtually constructed "ideal" aligners were constructed. The arch width and length between pairs of reference landmarks of the scanned CAs and corresponding dentition models were measured. Cone-beam computed tomography data and digital dental models were used for three-dimensional (3D) finite element analysis (FEA) modeling. Thirty-six scanned CA models with the corresponding 36 ideal CA models were constructed. One-way analysis of variance was used to determine the differences among deviation values at tooth level, and paired t-test was used to compare the displacements of teeth between the two group of CAs. RESULTS: All CAs were wider and shorter than the digital model from which they were constructed. In the scanned CA model group, significant stress was observed in the buccolingual area of the periodontal ligament on posterior teeth, and the corresponding displacements of teeth were also noted. Significantly larger coronal displacements were noted for the lateral incisor, the canine, the second premolar, and the first molar in the scanned CA group (P < .05). CONCLUSIONS: The general trend of ERD of thermoformed CAs was shown. This deformation may cause unforeseen tooth movements and negatively affect treatment outcomes.

Trimethylamine-N-Oxide Promotes High-Glucose-Induced Dysfunction and NLRP3 Inflammasome Activation in Retinal Microvascular Endothelial Cells.

Introduction: Along with blood glucose levels, diabetic retinopathy (DR) development also involves endogenous risk factors, such as trimethylamine-N-oxide (TMAO), a product of intestinal flora metabolic disorder, which exacerbates diabetic microvascular complications. However, the effect of TMAO on retinal cells under high-glucose conditions remains unclear. Therefore, this study examined the effects of TMAO on high-glucose-induced retinal dysfunction in the context of NLRP3 inflammasome activation, which is involved in DR. Materials and Methods: TMAO was assessed in the serum and aqueous humor of patients using ELISA. Human retinal microvascular endothelial cells (HRMECs) were treated for 72 h as follows: NG (normal glucose, D-glucose 5.5 mM), NG + TMAO (5 µM), HG (high glucose, D-glucose 30 mM), and HG + TMAO (5 µM). The CCK8 assay was then used to assess cell proliferation; wound healing, cell migration, and tube formation assays were used to verify changes in cell phenotype. ZO-1 expression was determined using immunofluorescence and western blotting. Reactive oxygen species (ROS) formation was assessed using DCFH-DA. NLRP3 inflammasome complex activation was determined using a western blot. Results: The serum and aqueous humor from patients with PDR contained higher levels of TMAO compared to patients with nontype 2 diabetes (Control), non-DR (NDR), and non-PDR (NPDR). TMAO showed significant acceleration of high-glucose-induced cell proliferation, wound healing, cell migration, and tube formation. ZO-1 expression decreased remarkably with the combined action of TMAO and a high glucose compared to either treatment alone. TMAO also promoted high-glucose-activated NLRP3 inflammasome complex. Conclusion: The combination of TMAO and high-glucose results in increased levels of ROS and NLRP3 inflammasome complex activation in HRMECs, leading to exacerbated retinal dysfunction and barrier failure. Thus, TMAO can accelerate PDR occurrence and development, thus indicating the need for early fundus monitoring in diabetic patients with intestinal flora disorders.

Effects of orthodontic camouflage treatment vs orthodontic-orthognathic surgical treatment on condylar stability in Class II hyperdivergent patients with severe temporomandibular joint osteoarthrosis: a retrospective observational study.

OBJECTIVES: To investigate the differences in profile changes and stability of the condyles between orthodontic camouflage treatment assisted by vertical control and that accomplished via orthognathic surgery in Class II hyperdivergent patients with TMJ osteoarthrosis (TMJOA). MATERIALS AND METHODS: This study included 27 Class II hyperdivergent TMJOA patients (54 condyles) who received orthodontic camouflage treatment (13 patients) or orthognathic surgery (14 patients) Cone-beam computerized tomography (CBCT) scans were taken before treatment (T1) and 1 year after treatment (T2). Cephalometric and TMJ measurement analyses were conducted to evaluate the change in profile and condyles from T1 to T2 using independent samples t-test and paired t-test. Three-dimensional (3D) deviation analysis was also performed to evaluate the stability of condyles from T1 to T2. RESULTS: Both groups showed significant profile improvement from T1 to T2. The changes in Z angle and ANB angle were larger in the surgical group than in the orthodontic group. Condylar width, length, and height remained stable after treatment in the orthodontic group (P > .05), while they reduced by 0.67 ± 0.85 mm, 1.14 ± 1.10 mm, and 1.07 ± 1.34 mm, respectively, in the surgical group (P < .05). Superior, posterior, medial, and lateral joint spaces were significantly reduced in the orthodontic group (P < .05). 3D deviations intuitively showed that condylar bone in the orthodontic group was more stable than that in the surgical group. CONCLUSIONS: For Class II hyperdivergent patients with severe TMJOA, orthodontic camouflage treatment with vertical control can effectively maintain the stability of condyles while significantly improving the profile. Surgical treatment yields a better profile but may increase the risk of condyle resorption.

Research progress of nephrotic syndrome accompanied by thromboembolism.

Thromboembolism (TE) is a common and serious complication of nephrotic syndrome (NS). NS is associated with hypercoagulability, which may be induced by changes in coagulation, anticoagulant, and fibrinolytic factors. Moreover, accumulating evidence supports the hypothesis that the complex interactions between genetic and acquired risk factors in TE should be considered and that genetic susceptibility should not be ignored. Extracellular vesicles (EVs) also play unique roles. Further research on EVs may provide new insights into the discovery and treatment of TE associated with NS. The occurrence of NS accompanied by TE may be associated with various risk factors. Preventive anticoagulant therapy can not only reduce the risk of TE in patients but also aggravate the risk of bleeding. Heparin and vitamin K antagonists (VKAs), traditional anticoagulant drugs, have been extensively applied in the prevention and treatment of thromboembolic diseases, and emerging direct oral anticoagulants (DOACs) also provide an alternative choice. Owing to the particularity of NS, the safe application of DOACs still needs to be addressed. This review aimed to comprehensively describe the pathophysiology of TE in NS, as well as analyze the associated risk factors, the opportunity for preventive anticoagulation, and current anticoagulant information.

Oral microbiome contributes to the failure of orthodontic temporary anchorage devices (TADs).

BACKGROUND: The stability of temporary anchorage devices (TADs) is critical in orthodontic clinics. The failure of TADs is multifactorial, and the role of the oral microbiome has not been clearly defined. Herein, we attempted to analyze the contribution of the oral microbiome to the failure of TADs. METHODS: Next-generation sequencing was adopted for analyzing the microbiome on the TADs from orthodontic patients. 29 TADs (15 failed TADs and 14 successful TADs) were used for 16S rRNA gene sequencing. A total of 135 TADs (62 failed TADs and 73 successful TADs) were collected to conduct metagenomic sequencing. Additionally, 34 verified samples (18 failed TADs and 16 successful TADs) were collected for quantitative real-time polymerase chain reaction analysis (qRT-PCR). RESULTS: Successful and failed TADs demonstrated discrepancies in microbiome structure, composition, and function. Clear separations were found in ß-diversity in 16S rRNA gene sequencing as well as metagenomic sequencing (p < 0.05). Metagenomic sequencing showed that Prevotella intermedia, Eikenella corrodens, Parvimonas spp., Neisseria elongata, and Catonella morbi were enriched in the failed groups. qRT-PCR also demonstrated that the absolute bacteria load of Prevotella intermedia was higher in failed TADs (p < 0.05). Considering functional aspects, the failed group showed enriched genes involved in flagellar assembly, bacterial chemotaxis, and oxidative phosphorylation. CONCLUSIONS: This study illustrated the compositional and functional differences of microorganisms found on successful and failed TADs, indicating that controlling bacterial adhesion on the surface of TADs is essential for their success rate.

A quantitative analysis of facial changes after orthodontic treatment with vertical control in patients with idiopathic condylar resorption.

OBJECTIVE: This study aimed to investigate temporomandibular joint (TMJ) stability and three-dimensional (3D) facial changes in class II hyperdivergent patients with stable idiopathic condylar resorption (ICR) after orthodontic camouflage treatment with vertical control by using temporary anchorage devises (TADs). METHODS: Nineteen skeletal class II hyperdivergent patients who were diagnosed with stable ICR underwent bicuspid extraction orthodontic treatment with vertical control via TADs were enrolled. TMJ was evaluated with the cone beam computerized tomography (CBCT) and clinical records before and after treatment. Changes in dental and skeletal parameters were evaluated with cephalometric and dental cast measurements. The 3D morphable model (3DMM) method was performed with the MeshMonk toolbox for the 3D facial analysis. After the reposition and landmark setting process, 3D facial heatmaps were used to illustrate facial changes, and the 3D deviations of landmarks were calculated. RESULTS: Both the imaging evaluation and clinical examination proved that TMJs remained stable after treatment. The retrusion of the upper and lower incisors reached 6.63 ± 0.79 mm and 3.78 ± 1.49 mm. The intrusion of the upper first molar reached 2.65 ± 0.75 mm, with a 2.27 ± 0.82° counterclockwise rotation of the mandibular plane. An upward shift of the soft tissue pogonion (2.34 ± 2.03 mm) and protrusion of Po-NB (0.82 ± 0.70 mm) was gained. Larger intrusion was found in the lower lip (3.29 ± 0.80 mm) than in the upper lip (2.20 ± 0.69 mm). CONCLUSION: Camouflage orthodontic treatment with TAD for vertical control is acceptable for skeletal class II hyperdivergent patients with ICR, which can improve the facial profile.

Effect of Different Anchorage Reinforcement Methods on Long-Term Maxillary Whole Arch Distalization with Clear Aligner: A 4D Finite Element Study with Staging Simulation.

The objective of this study was to examine how various anchorage methods impact long-term maxillary whole arch distalization using clear aligners (CAs) through an automated staging simulation. Three different anchorage reinforcement methods, namely, Class II elastics, buccal temporary anchorage device (TAD), and palatal TAD, were designed. Orthodontic tooth movement induced by orthodontic forces was simulated using an iterative computation method. Additionally, the automatic adjustment of the CA was simulated through the application of the thermal expansion method. The results indicated that the palatal TAD group had the largest retraction of incisors, followed by the buccal TAD group and the Class II elastic group, while the least was in the control group. The largest distal displacements and efficiency of molar distalization for the first and the second molars were noticed in the palatal TAD group. Arch width increased at the molar and premolar levels in all groups. The FEM results suggested palatal TAD had the best performance considering anterior teeth anchorage maintenance, both sagittally and vertically. However, attention should be paid to the possible increasement of arch width.

Microbiological Advances in Orthodontics: An Overview and Detailed Analysis of Temporary Anchorage Devices.

Dental biofilm is the initiating factor of oral diseases, such as periodontitis and caries. Orthodontic treatment could alter the microbiome structure balance, and increase the risk of such diseases. Furthermore, fixed appliances can induce temporary changes in the microbiome community, and the changes that clear aligners bring are smaller by comparison. Temporary anchorage devices (TADs) are skeletal anchorages that are widely used in orthodontic treatment. Microorganisms affect the occurrence and development of inflammation surrounding TADs. At present, existing researches have verified the existence of plaque biofilm on the surface of TADs, but the formation of plaque biofilm and plaque composition under different stable conditions have not been fully understood. The development of high-throughput sequencing, molecular biology experiments, and metabonomics have provided new research ideas to solve this problem. They can become an effective means to explore the microbiome surrounding TADs.

The accuracy of a three-dimensional face model reconstructing method based on conventional clinical two-dimensional photos.

BACKGROUND: This study aims to investigate the accuracy of a three-dimensional (3D) face reconstruction method based on conventional clinical two-dimensional (2D) photos. METHODS: Twenty-three patients were included, and Character Creator v3.2 software with the Headshot v1.0 plugin was used for 3D face model reconstruction. Various facial landmarks were finely adjusted manually to refine the models. After preprocessing and repositioning, 3D deviation analysis was performed. The accuracy of the landmarks in different dimensions was determined, and twelve facial soft tissue measurements were compared to validate the clinical potential of the method. RESULT: The reconstructed 3D face models showed good facial morphology with fine texture. The average root mean square errors between face scan models and reconstructed models at perioral area (1.26 ± 0.24 mm, 95%CI: 1.15-1.37 mm) were significantly smaller than the entire facial area (1.77 ± 0.23 mm, 95%CI:1.67-1.88 mm), P < 0.01. The deviation of menton of soft tissue was significantly larger than pronasale (P < 0.01). The deviations of all landmarks in the Y-direction were significantly larger than those in the other 2 dimensions (Y > Z > X, P < 0.01). A significant difference (P < 0.05) of approximately 1.5 mm was found for facial height. Significant differences (P < 0.05) were also identified in the remaining 6 soft tissue measurements, with average deviations no greater than 0.5 mm (linear measurement) or 1.2° (angular measurements). CONCLUSION: A 3D face modeling method based on 2D face photos was revealed and validated. The reconstruction accuracy of this method is clinically acceptable for orthodontic measurement purposes, but narrow clinical indications and labor-intensive operations remain problems.

m6A transferase METTL3 regulates endothelial-mesenchymal transition in diabetic retinopathy via lncRNA SNHG7/KHSRP/MKL1 axis.

Diabetic retinopathy is one of the microvascular complications in diabetic patients and the leading cause of blindness worldwide. The levels of METTL3, lncRNA SNHG7, KHSRP, MKL1, endothelial and mesenchymal markers were determined by RT-qPCR or western blot assays in vitro and in vivo. H&E staining was used to observe the retinal structure in a mouse model of DR. The expression levels of METTL3 and SNHG7 were significantly downregulated in DR patients, DR mice and high glucose-induced HRMECs cells. Notably, METTL3 installed the m6A modification and enhanced the stability of SNHG7. Besides, METTL3 inhibited HRMECs EndoMT by promoting the expression of SNHG7. Additionally, SNHG7 was found to weaken MKL1 mRNA stability by binding to the RNA-binding protein KHSRP. Furthermore, we verified that METTL3 regulated EndoMT in DR through the SNHG7/MKL1 axis. We conclude that METTL3 regulates endothelial-mesenchymal transition in DR via the SNHG7/KHSRP/MKL1 axis, providing a new target for DR treatment.

Similarities and differences of estrogen in the regulation of temporomandibular joint osteoarthritis and knee osteoarthritis.

BACKGROUND: Temporomandibular joint osteoarthritis (TMJOA) and knee osteoarthritis (knee OA) are two kinds of common osteoarthritis (OA) that are characterized by chronic degeneration of soft and hard tissues around joints. Their gender and age differences suggest that there are similarities and differences between the pathogenic mechanisms of TMJOA and knee OA. OBJECTIVE: To review recent studies on the effect of estrogen on TMJOA and knee OA, and summarize their possible pathogenesis and molecular mechanisms. SOURCES: Articles up to present reporting the relationship of estrogen and TMJOA or knee OA are included. An extensive electronic search was conducted of databases including PubMed, Web of science core collection. CONCLUSION: According to epidemiological investigations, TMJOA primarily happens to females of puberty and childbearing age, while knee OA mainly affects postmenopausal women. Epidemiological investigation and experimental research suggest that estrogen may have a different effect on TMJ and on knee. Though estrogen regulates TMJOA and knee OA via estrogen-related receptors (ERR), their pathogenesis and pathway of estrogen regulation are different. To find out the accurate regulation of estrogen on TMJOA and knee OA, specific pathways and molecular mechanisms still need further exploration.

Occlusal change in posterior implant-supported single crowns and its association with peri-implant bone level: a 5-year prospective study.

OBJECTIVES: This study aims to analyze the 5-year occlusal change in posterior implant-supported single crowns and the association between the relative occlusal force (ROF) and peri-implant bone level. MATERIALS AND METHODS: Partially edentulous patients who had received implant-supported single crowns in the posterior region were included. Occlusal examinations with a computerized occlusion analysis system were conducted at 0.5, 3, 6, 12, 24, 36, 48, and 60 months after delivery of the implant-supported single crown. The ROFs of implant-supported single crowns, mesial adjacent teeth, and control natural teeth were recorded. Intraoral periapical radiographs were taken at each follow-up time to evaluate marginal bone level (MBL). Ordinary least square regression was used to analyze the association between ROF and MBL. RESULTS: Thirty-seven posterior implant-supported single crowns in 33 participants (23.9 to 70.0 years) were followed up for 0.5 to 60 months [(42.4 ± 26.0) months]. The ROF of implant-supported single crowns increased from 2 weeks to 3 months (P < 0.01) and increased continuously between all two sequential time points from 6 to 36 months, with significant differences (P < 0.05). Then ROFs of implant-supported single crowns were significantly higher than those of control teeth at 48 and 60 months (P < 0.05). Regression analysis showed that ROF was significantly associated with MBL with a coefficient of 0.008 (P < 0.05). CONCLUSION: The ROFs of posterior implant-supported single crown have significant change during 5 years' follow-up. The association between ROF and MBL has limited clinical significance. TRIAL REGISTRATION: Chinese Clinical Trial Registry: ChiCTR-ROC-17012240. CLINICAL RELEVANCE: The occlusion of implant-supported single crowns should be carefully monitored during follow-up examinations, and occlusal adjustment should be considered to prevent overloading.

MSC-derived exosomal lncRNA SNHG7 suppresses endothelial-mesenchymal transition and tube formation in diabetic retinopathy via miR-34a-5p/XBP1 axis.

AIMS: Diabetic retinopathy (DR) is the most common complication of type 2 diabetes mellitus, which could result in visual impairment. Accumulating studies have shown the implication of long non-coding RNAs (lncRNAs) in the pathogenesis of DR. Our aims are to investigate whether lncRNA SNHG7 plays a role during DR pathogenesis. MAIN METHODS: Human retinal microvascular endothelial cells (HRMECs) were treated with high glucose (HG) to build cell model. Relative expression of RNAs were examined using qPCR, and western blot or immunofluorescence analysis was adopted to detect the protein expression. Cell viability, migration and angiogenic capacity of HRMECs were estimated through CCK-8, transwell and tube formation experiments, respectively. Dual-luciferase reporter and RNA pull down assays were employed to verify the interplay between miR-34a-5p and SNHG7 or XBP1. Mesenchymal stem cells (MSCs) were identified by examining typical surface makers using flow cytometry and the differentiation abilities via Alizarin red, Oil red O and Alcian blue staining. MSC-derived exosomes were verified by transmission electron microscopy and western blot. KEY FINDINGS: LncRNA SNHG7 sponged to and negatively regulated miR-34a-5p. SNHG7 overexpression repressed HG induced endothelial-mesenchymal transition (EndMT) and tube formation of HRMECs, while miR-34a-5p overexpression could reverse this effect. miR-34a-5p targeted and negative regulated XBP1. Knockdown of miR-34a-5p repressed HG induced EndMT and tube formation, which were partially blocked by XBP1 inhibition. MSC-derived exosomes could transfer SNHG7 to HRMECs and modulated EndMT and tube formation. SIGNIFICANCE: The MSC-derived exosomal lncRNA SNHG7 suppresses EndMT and tube formation in HRMECs via miR-34a-5p/XBP1 axis.

Laboratory assays on the effects of a novel acaricide, SYP-9625 on Tetranychus cinnabarinus (Boisduval) and its natural enemy, Neoseiulus californicus (McGregor).

OBJECTIVE: Tetranychus cinnabarinus (Boisduval) is an agricultural mite pest threatens crops throughout the world, causing serious economic loses. Exploring the effects of acaricides on predatory mites is crucial for the combination of biological and chemical control of T. cinnabarinus. Neoseiulus californicus (McGregor) is one of the principal natural enemies of T. cinnabarinus, which can be applied in protected agriculture. In this study, the effects of sublethal concentrations of a new acaricide, SYP-9625 on two mite species, and the effects of the application concentration on predatory mite, N. californicus were assessed. The aim of the present study was to evaluate the effect of SYP-9625 on life parameters and predation capacity of N. californicus based on the concentration-response bioassay of T. cinnabarinus to explor the application of the new acaricide with natural enemy N. californicus. METHOD: All of the experiments were conducted under laboratory conditions [25 ± 1°C, 16: 8 h (L: D) and 75 ± 5% RH]. The sublethal concentrations LC10 (0.375µg/mL) and the LC30 (0.841µg/mL) against T. cinnabarinus and the application concentration (100µg/mL) against N. californicus were used to evaluate the effects of SYP-9625 on population parameters of N. californicus based on an age-stage, two-sex life table and its predation capacity by functional response. RESULT: cinnabarinus females treated with LC30 exhibited significantly reduced net reproductive rates (R0 = 11.02) in their offspring compared with females treated with LC10 (R0 = 14.96) and untreated females (R0 = 32.74). However, the intrinsic rate of increase (rm) and the finite rate of increase (λ) of N. californicus indicated that the application concentration of SYP-9625 had no significant negative effect on N. californicus eggs (rm = 0.277, λ = 1.319) compared to the control (rm = 0.292, λ = 1.338). Additionally, most population parameters of N. californicus showed a dose-dependent manner with the increase of the concentration of SYP-9625 against T. cinnabarinus. SYP-9625 also stimulated the control efficiency of N. californicus against immobile stages including eggs and larvae. CONCLUSION: This study demonstrated that sublethal concentrations of SYP-9625 can inhibit the population growth of T. cinnabarinus. In addition, the sublethal concentrations and the application concentration showed no effect on the population growth of N. californicus. These two advantages described above showed great commercial potential of this new acaricide based on population parameters of the two mite species and predation capacity of the predatory mite under laboratory conditions.

[Assessment of Emission and Co-Reduction of PCDD/Fs and PCNs in the Secondary Copper Production Sector].

Polychlorinated naphthalenes (PCNs) could he generated and discharged unintentionally in the secondary copper production industry with similar mechanisms as PCDD/Fs during high-temperature industrial processes. Therefore, measures that reduce the release of PCDD/Fs will also reduce PCNs emissions. Analysis of the technical process and correlation with their emissions will provide theoretical basis for co-mitigation of PCNs and PCDD/Fs. The production process of secondary copper was analyzed, with key production stages of discharge identified through monitoring the emissions of two kinds of pollutants. Co-reduction technologies were screened and specified. Three recommendations on co-mitigation of the two pollutants were provided to support the implementation of Stockholm Convention and UPOPs reduction in the secondary copper production sector in China. Key words:secondary copper industry; smelting; PCNs; PCDD/Fs; co-mitigation